After first boot of Licud shows me that the built-in Mesa driver is currently installed.
I install the ATI Catalyst™ Display Driver 10.04 downloaded from the official site (http://support.amd.com/us/gpudownloa...5&lang=English) (I use the automatic installation). Then I configure the newly installed driver
Code:
sudo aticonfig --initial -f
and reboot.
Installation of the driver - log file.
Code:
fglrx-install.log
Creating symlink /var/lib/dkms/fglrx/8.723/source ->
* * * * * * * * /usr/src/fglrx-8.723
DKMS: add Completed.
Kernel preparation unnecessary for this kernel. *Skipping...
Building module:
cleaning build area....
cd /var/lib/dkms/fglrx/8.723/build; sh make.sh --nohints --uname_r=2.6.32-21-generic --norootcheck........
cleaning build area....
DKMS: build Completed.
fglrx.ko:
Running module version sanity check.
- Original module
* - No original module exists within this kernel
- Installation
* - Installing to /lib/modules/2.6.32-21-generic/updates/dkms/
depmod.......
DKMS: install Completed.
After installation of the driver there is no reaction for
Code:
glxinfo | grep OpenGL
the operation in the terminal seems to be suspended
Code:
fgl_glxgears
Using GLX_SGIX_pbuffer
the same problem - operation is suspended
Code:
LIBGL_DEBUG=verbose glxinfo | grep render
libGL: XF86DRIGetClientDriverName: 8.72.5 fglrx (screen 0)
libGL: OpenDriver: trying /usr/lib/dri/tls/fglrx_dri.so
libGL: OpenDriver: trying /usr/lib/dri/fglrx_dri.so
libGL: XF86DRIGetClientDriverName: 8.72.5 fglrx (screen 0)
libGL: OpenDriver: trying /usr/lib/dri/tls/fglrx_dri.so
libGL: OpenDriver: trying /usr/lib/dri/fglrx_dri.so
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 5, (OK)
ukiOpenByBusid: ukiOpenMinor returns 5
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
operation is suspended again
My Xorg:
Code:
cat /etc/X11/xorg.conf
[spoiler]Section "ServerLayout"
Identifier * * "aticonfig Layout"
Screen * * *0 *"aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier * "aticonfig-Monitor[0]-0"
Option * *"VendorName" "ATI Proprietary Driver"
Option * *"ModelName" "Generic Autodetecting Monitor"
Option * *"DPMS" "true"
EndSection
Section "Device"
Identifier *"aticonfig-Device[0]-0"
Driver * * *"fglrx"
BusID * * * "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device * * "aticonfig-Device[0]-0"
Monitor * *"aticonfig-Monitor[0]-0"
DefaultDepth * * 24
SubSection "Display"
Viewport * 0 0
Depth * * 24
EndSubSection
EndSection
What may be the problem? I am trying to launch Nexuiz to check up if the driver works properly. The game doesn't run neither with ATI Catalyst™ Display Driver 10.04, nor with the driver installed from System/Administration/Hardware Drivers GUI.
Bookmarks